The Influence Of Temperature Of Egg Tray Mold On Egg Tray Machine

The temperature control of the egg tray mold is difficult to control if the mold is heated with thermal oil, which will affect the entire operation of the egg tray machine forming system. Therefore, a simple control method can achieve the goal, which is to control the mold temperature by controlling the hot pressing solidification time.
When the temperature of the egg tray equipment mold is high and the heating and pressing time is too long, it will waste heat energy and may burn the product; If the mold temperature is too low and the heating time is too short, it is easy to cause mucosal failure, which affects the normal operation of egg tray production equipment.
The drying mold temperature and heating time are controlled by the hot pressing mold temperature feedback control system. When the mold temperature is high, the hot pressing time is automatically shortened, and when the mold temperature is low, the hot pressing time is automatically extended. The mold temperature time relationship curve can be inputted by personnel through the human-machine interface control system based on operating experience, and the control system automatically controls based on data.